Category: Acer Aspire 9300

Bug: Fedora 8 Test 2 Boot

Fedora 8 Test 2 freezes when I try to boot it. This happens both with the install DVD and once I have it installed. I need to try to “post a report”, but until I figure out how, here is the output:

Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report

For now, I am trying out Ubuntu. I am kind of dead in the water with Fedora right now unless I go back to Fedora 6 or maybe 7.

Update: Here is the bug — 316811

Actually, I did not do a good job searching for a bug.  My bug was marked duplicate and here is the actual bug: 299301

Video Driver

Applies To: Acer Aspire 9300 Laptop

The Laptop has an nVidia GeForce Go 6100 video card.

Manual Install

The driver was downloaded from this link:
nVidia website

The problem with the manual install is that you manually have to reinstall each time you update the kernel. If you update the kernel with yum and you have installed the video driver with yum, yum will install the driver in the new kernel for you.

Using Yum

Make sure to configure yum with freshrpms repository.

You can run the following command to see which packages are available:

yum list | grep nvidia

This is what it gave me:

nvidia-x11-drv.x86_64 1.0.9746-1 freshrpms

To install, run the following:

yum install nvidia-x11-drv

Laptop Specs and Linux Status

Model: Acer Aspire 9300

Acer Website Specs

I have installed Fedora Core 6, and below are the things I have working so far.

Component Specs Working In Linux
Screen 17″ WXGA Works great at 1440×900@50hz
Video Card nVidia GeForce Go 6100 Works by installing nvidia driver rpm from freshrpms repository;
had one small problem with Beryl and NVidia combination.
Installing Nvidia Driver
DVD/CD DVD & CD Burner CD works fine — burned both CD and DVD from K3b
Touchpad “Scroll wheel” does not work, but the touchpad works fine as a regular mouse.
Camera Not Sure
Modem Not Sure Haven’t tried to use it
Ethernet nVidia Corporation MCP51 Ethernet Controller Works fine
Wireless Atheros AR5005G 802.11abg Works by installing madwifi rpm from freshrpms repository
Audio nVidia Corporation MCP51 High Definition Audio Works fine — had a little hickup with a kernel upgrade. Forced change to Alsa drivers and had to adjust volume for Alsa.
Card Reader Texas Instruments 5-in-1 Multimedia Card Reader Not Sure; never used it.

lspci listing:

00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:05.0 VGA compatible controller: nVidia Corporation C51 PCI Express Bridge (rev a2)
00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
00:0a.3 Co-processor: nVidia Corporation MCP51 PMU (rev a3)
00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
00:14.0 Bridge: nVidia Corporation MCP51 Ethernet Controller (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
04:05.0 Ethernet controller: Atheros Communications, Inc. AR5005G 802.11abg NIC (rev 01)
04:06.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
04:06.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)

smoltSendProfile

We are about to send the following information to the Fedora Smolt server:

UUID: 727afa5c-bf79-46ea-a530-a1ccd4b6dca3
OS: Fedora Core release 6 (Zod)
defaultRunlevel: 5
language: en_US.UTF-8
platform: x86_64
bogomips: 1608.26
CPUVendor: AuthenticAMD
CPUModel: AMD Turion(tm) 64 X2 Mobile Technology TL-50
numCPUs: 2
CPUSpeed: 1600
systemMemory: 873
systemSwap: 1759
vendor: Acer
system: Aspire 9300 0100
formfactor: laptop
kernel: 2.6.19-1.2911.fc6

Devices
=================================
(4318:760:4133:274) pci, Unknown, OTHER, C51 Memory Controller 5
(4318:761:4133:274) pci, Unknown, OTHER, C51 Memory Controller 4
(4318:583:4133:274) pci, nvidia, VIDEO, C51 PCI Express Bridge
(4318:755:4133:274) pci, Unknown, OTHER, C51 Host Bridge
(4318:639:4133:274) pci, Unknown, OTHER, C51 Memory Controller 3
(1204:32897:None:None) usb, usbhid, OTHER, USB HID Interface
(1204:32897:None:None) usb, usbhid, OTHER, USB HID Interface
(None:None:None:None) input, Unknown, None, PC Speaker
(None:None:None:None) usb_device, Unknown, None, USB Raw Device Access
(None:None:None:None) ide, ide-cdrom, None, IDE device (master)
(None:None:None:None) ide, ide-disk, None, IDE device (master)
(4318:625:4133:274) pci, Unknown, OTHER, MCP51 PMU
(4318:624:4133:274) pci, Unknown, OTHER, MCP51 Host Bridge
(4318:762:4133:274) pci, Unknown, OTHER, C51 Memory Controller 0
(4318:763:0:0) pci, pcieport-driver, OTHER, C51 PCI Express Bridge
(4318:764:0:0) pci, pcieport-driver, OTHER, C51 PCI Express Bridge
(4318:765:0:0) pci, pcieport-driver, OTHER, C51 PCI Express Bridge
(4318:766:4133:274) pci, Unknown, OTHER, C51 Memory Controller 1
(4318:767:4133:274) pci, Unknown, OTHER, C51 Host Bridge
(None:None:None:None) net, Unknown, NETWORK, Networking Interface
(None:None:None:None) serio, Unknown, None, i8042 AUX0 port
(4318:638:4133:274) pci, Unknown, OTHER, C51 Memory Controller 2
(None:None:None:None) platform, Unknown, None, Platform Device (bluetooth)
(4172:32827:4133:274) pci, tifm_7xx1, OTHER, 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
(None:None:None:None) pnp, i8042 aux, None, PnP Device (SYN0302)
(None:None:None:None) input, Unknown, None, Cypress PS/2 to USB Adapter
(4318:617:4133:274) pci, forcedeth, OTHER, MCP51 Ethernet Controller
(4318:608:4133:274) pci, Unknown, OTHER, MCP51 LPC Bridge
(4318:612:4133:274) pci, nForce2_smbus, OTHER, MCP51 SMBus
(4318:613:4133:274) pci, AMD_IDE, IDE, MCP51 IDE
(1026:22018:None:None) usb, Unknown, OTHER, USB Vendor Specific Interface
(None:None:None:None) input, Unknown, None, SynPS/2 Synaptics TouchPad
(None:None:None:None) usb_device, Unknown, None, USB Raw Device Access
(4172:32825:4133:274) pci, yenta_cardbus, SOCKET, PCIxx12 Cardbus Controller
(4318:620:4133:274) pci, HDA Intel, OTHER, MCP51 High Definition Audio
(4318:621:4133:274) pci, ohci_hcd, USB, MCP51 USB Controller
(4318:622:4133:274) pci, ehci_hcd, USB, MCP51 USB Controller
(4318:623:0:0) pci, Unknown, OTHER, MCP51 PCI Bridge
(None:None:None:None) platform, i8042, None, Platform Device (i8042)
(None:None:None:None) platform, pcspkr, None, Platform Device (pcspkr)
(None:None:None:None) usb_device, Unknown, None, USB Raw Device Access
(None:None:None:None) usb_device, Unknown, None, USB Raw Device Access
(None:None:None:None) net, Unknown, NETWORK, Networking Wireless Control Interface
(None:None:None:None) serio, Unknown, None, i8042 AUX1 port
(4130:4352:0:0) pci, Unknown, OTHER, K8 [Athlon64/Opteron] HyperTransport Technology Configuration
(4130:4353:0:0) pci, Unknown, OTHER, K8 [Athlon64/Opteron] Address Map
(4130:4354:0:0) pci, k8_edac, OTHER, K8 [Athlon64/Opteron] DRAM Controller
(4130:4355:0:0) pci, k8temp, OTHER, K8 [Athlon64/Opteron] Miscellaneous Control
(None:None:None:None) input, Unknown, None, Cypress PS/2 to USB Adapter
(None:None:None:None) net, Unknown, NETWORK, WLAN Interface
(None:None:None:None) serio, Unknown, None, i8042 AUX2 port
(None:None:None:None) pnp, i8042 kbd, None, IBM Enhanced (101/102-key, PS/2 mouse support)
(None:None:None:None) serio, psmouse, None, i8042 AUX3 port
(None:None:None:None) serio, atkbd, None, i8042 KBD port
(None:None:None:None) input, Unknown, KEYBOARD, AT Translated Set 2 keyboard
(None:None:None:None) platform, Unknown, None, Platform Device (vesafb.0)
(None:None:None:None) platform, serial8250, None, Platform Device (serial8250)
(5772:26:5224:1048) pci, ath_pci, OTHER, AR5005G 802.11abg NIC

Send this information to the Smolt server? (y/n)

Installing Beryl

Beryl is the eye-candy effects for X-Windows. I have heard it compared to Windows’ Aero. It allows windows to shake like jello as you drag them and display previews of windows as you hover over them on the task bar.

Installing

Used yum to install: beryl-gnome

Note: This is a meta-package that will install the necessary packages.

Resolving Problems

I had to remove previously installed nvidia driver libraries:
[skp@localhost lib64]$ ls lib*9631
libGLcore.so.1.0.9631 libnvidia-cfg.so.1.0.9631 libXvMCNVIDIA.so.1.0.9631
libGL.so.1.0.9631 libnvidia-tls.so.1.0.9631

Starting Automatically

I created this script: /usr/local/bin/start-beryl
#!/bin/sh
LD_PRELOAD=/usr/lib64/nvidia/libGL.so.1 beryl-manager

I had to make it executable:
chmod a+x start-beryl

From the command-line, I ran gnome-session-properties and:

  • on Startup Programs
  • clicked add — /usr/local/bin/start-beryl

Resources

Install Beryl on Fedora Core

Resources for White Screen Issue

Most helpful list
Beryl White Screen Issue
Beryl: White screen of death
Beryl White Cube White Screen XGL whats up?